CNC Combo Set-up Operator
Company Name:
Seastrom Manufacturing Co
Position Type:
Full-time
SUMMARY
The CNC Combo Set-up Operator will program, set-up, and operate CNC machinery, perform machine maintenance, make operational adjustments, and perform parts inspections.
TECHNICAL SKILLS
Read, understand, and interpret engineering drawings.
Knowledge of machining tools and procedures.
Program writing and editing.
Load programs into the CNC controller and verify correct machine motions.
Load parts into the machinery, using the best tooling methods available.
Develop methods of machining new and difficult jobs.
Inspect product using precision measuring tools.
Product inspections at set-up and throughout the production run.
Monitor machine for unusual conditions.
Diagnose machine problems, make mechanical adjustments and minor repairs.
Provide machine maintenance including lubricants and coolant levels.
Willing to train others.
Work in a safe and professional manner, keeping a clean work area.
Wear proper personal protective equipment.
Cooperation with supervisor and co-worker, willing to work as a team.
Timely arrival and regular attendance at work.
Willing to work overtime.
Willing to work any shift.
Other duties may be assigned.
Requirements:
QUALIFICATIONS
Strong mechanical aptitude. Demonstrated ability to perform moderate troubleshooting and machine setups. Skilled at properly inspecting and monitoring quality throughout production runs. Able to properly plan machining sequence including tooling selection and fixture preparation. Expected to seek continuous improvement in production efficiency. You may be required to possess or obtain hand tools or measuring equipment.
SUPERVISORY RESPONSIBILITIES
This position has no supervisory responsibilities.
EDUCATION and/or EXPERIENCE
Associate Degree/Technical Certification or equivalent combination of education and experience in machining.
LANGUAGE SKILLS
The ability to read, write and speak the English language with comprehension skills sufficient to understand safety standards and job performance expectations.
MATHEMATICAL SKILLS
Above average ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
REASONING ABILITY
Ability to interpret instructions which may be furnished in written, oral, diagram or schedule form.
CERTIFICATES, LICENSES, REGISTRATIONS
None required.
PHYSICAL DEMANDS
While performing the duties of this job, the employee is regularly required to stand; use hands to, handle, or grab; reach with hands and arms. The employee frequently is required to walk and stoop, kneel, crouch push, and pull. The employee is frequently required to lift and/or move 20 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close and distance vision, depth perception and the ability to adjust focus. The employee is required to wear safety toe shoes/boots for at least 8 hours a day, hearing protection, and eye protection.
WORK ENVIRONMENT
While performing the duties of this job the employee is regularly exposed to moving mechanical parts, oils or other cutting fluids
The noise level in the environment is loud.
Job location is in Twin Falls, ID.
Company Description:
Seastrom is a true story of the American Dream. Seastrom was founded in Glendale, California in 1928 by Wensil Seastrom in his garage. The company resided in Glendale in several locations until 1994, when it moved to Twin Falls, Idaho. Still family owned today, Seastrom's state-of-the-art 100,000 square foot facility houses the premier stocking manufacturer of precision fasteners.
Seastrom stocks over 44,000 part numbers of a wide variety of fasteners, including flat round washers, spring clips, spacers, shoulder washers, lock washers, clamps, brackets, expansion plugs and much more. We also manufacture and supply Hiram Jones pins, terminals & connectors.
Aside from our huge inventory of stocked parts, Seastrom can modify any of our standard part numbers to meet your applications reducing the cost of tooling.
If our standards or a modification doesn't work, Seastrom engineers will work with you to design the best and most economical part for your application. Seastrom Manufacturing is a full service manufacturer. With Seastrom, we not only make quality parts, we help make quality products.Estimated Salary: $20 to $28 per hour based on qualifications.
Seastrom Manufacturing Co
Position Type:
Full-time
SUMMARY
The CNC Combo Set-up Operator will program, set-up, and operate CNC machinery, perform machine maintenance, make operational adjustments, and perform parts inspections.
TECHNICAL SKILLS
Read, understand, and interpret engineering drawings.
Knowledge of machining tools and procedures.
Program writing and editing.
Load programs into the CNC controller and verify correct machine motions.
Load parts into the machinery, using the best tooling methods available.
Develop methods of machining new and difficult jobs.
Inspect product using precision measuring tools.
Product inspections at set-up and throughout the production run.
Monitor machine for unusual conditions.
Diagnose machine problems, make mechanical adjustments and minor repairs.
Provide machine maintenance including lubricants and coolant levels.
Willing to train others.
Work in a safe and professional manner, keeping a clean work area.
Wear proper personal protective equipment.
Cooperation with supervisor and co-worker, willing to work as a team.
Timely arrival and regular attendance at work.
Willing to work overtime.
Willing to work any shift.
Other duties may be assigned.
Requirements:
QUALIFICATIONS
Strong mechanical aptitude. Demonstrated ability to perform moderate troubleshooting and machine setups. Skilled at properly inspecting and monitoring quality throughout production runs. Able to properly plan machining sequence including tooling selection and fixture preparation. Expected to seek continuous improvement in production efficiency. You may be required to possess or obtain hand tools or measuring equipment.
SUPERVISORY RESPONSIBILITIES
This position has no supervisory responsibilities.
EDUCATION and/or EXPERIENCE
Associate Degree/Technical Certification or equivalent combination of education and experience in machining.
LANGUAGE SKILLS
The ability to read, write and speak the English language with comprehension skills sufficient to understand safety standards and job performance expectations.
MATHEMATICAL SKILLS
Above average ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
REASONING ABILITY
Ability to interpret instructions which may be furnished in written, oral, diagram or schedule form.
CERTIFICATES, LICENSES, REGISTRATIONS
None required.
PHYSICAL DEMANDS
While performing the duties of this job, the employee is regularly required to stand; use hands to, handle, or grab; reach with hands and arms. The employee frequently is required to walk and stoop, kneel, crouch push, and pull. The employee is frequently required to lift and/or move 20 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close and distance vision, depth perception and the ability to adjust focus. The employee is required to wear safety toe shoes/boots for at least 8 hours a day, hearing protection, and eye protection.
WORK ENVIRONMENT
While performing the duties of this job the employee is regularly exposed to moving mechanical parts, oils or other cutting fluids
The noise level in the environment is loud.
Job location is in Twin Falls, ID.
Company Description:
Seastrom is a true story of the American Dream. Seastrom was founded in Glendale, California in 1928 by Wensil Seastrom in his garage. The company resided in Glendale in several locations until 1994, when it moved to Twin Falls, Idaho. Still family owned today, Seastrom's state-of-the-art 100,000 square foot facility houses the premier stocking manufacturer of precision fasteners.
Seastrom stocks over 44,000 part numbers of a wide variety of fasteners, including flat round washers, spring clips, spacers, shoulder washers, lock washers, clamps, brackets, expansion plugs and much more. We also manufacture and supply Hiram Jones pins, terminals & connectors.
Aside from our huge inventory of stocked parts, Seastrom can modify any of our standard part numbers to meet your applications reducing the cost of tooling.
If our standards or a modification doesn't work, Seastrom engineers will work with you to design the best and most economical part for your application. Seastrom Manufacturing is a full service manufacturer. With Seastrom, we not only make quality parts, we help make quality products.Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
